Control unit for pulsed/strobe light

The units are microcontroller-based and specially designed to fit all types of LATAB's lighting. This is thanks to a Plug-&-Play function that automatically adapts/limits the current to connected lighting. The lighting is switched on - when an external signal is added to the trigger input - with a pulse length which in the basic model is determined by a rotary switch inside the unit. Three selectable modes of operation; normal/standalone, externally voltage-controlled light intensity and double the current. The product range includes types with up to four lighting outputs/channels as well as control via Ethernet and RS232. Casings of black anodised aluminium.

General specifications
Supply voltage 24VDC ± 10%, max. 2,5A x number of channels *1
Output power max. 8 A/ 24A
Light intensity Adjustable 0-100%
Pulsating lighting Adjustable 50-1500µs i 16 steps
Trigger input 5-24V, optically isolated
Trigger frequency max. 200 Hz *2
Operating temperature 0-55 °C
Orderinformation
Order number Intensity control mode Output power Number of channels Trigger delay (0-48 msec) PDF on request
PAD1 1131/8 Intern potentiometer 8 A 1 -
PAD1 1131/24 Intern potentiometer 24 A 1 -
PAD1 1141/8 0-10V 8 A 1 -
PAD1 1231/8 Intern potentiometer 8 A/chan. 2 -
PAD1 1431/8 Intern potentiometer 8 A/chan. 4 -
PAD1 1132/8 RS-232 8 A 1 Yes
PAD1 1132/24 RS-232 24 A 1 Yes
PAD1 1432/8 RS-232 8 A/chan. 4 Yes
PAD1 4132/8 Ethernet 8 A 1 Yes
PAD1 4132/24 Ethernet 24 A 1 Yes
PAD1 4232/8 Ethernet 8 A/chan. 2 Yes
PAD1 4432/8 Ethernet 8 A/chan. 4 Yes

*1) The current deflection (average value) depends on the connected lighting and operating conditions such as trigger frequency, set pulse length and light intensity as well as possible synchronization with several channels.

*2) Limitations may occur depending on the control unit and connected lighting.

Cable is ordered separately with article number and cable length. Ex LKA1 1081/3

STEP files (3D CAD files) for all products are available on request.

Share by: